If the dialog box shown above appears, press [Retry] to continue the installation. Use [ ], [ ] or Scroll Wheel to select a reception mode, then press [OK]. Use Scroll Wheel to move the cursor position. If you want to set daylight saving time without setting the time zone, go to step 9. The Color Network ScanGear installation screen appears. Change to the IP address, subnet mask, and gateway address settings will be effective after restart the machine.
|Date Added:||23 October 2012|
|File Size:||15.11 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Color Newwork ScanGear Install this software to use the machine as a scanner on a network.
Canon imageRUNNER C1021i
If you want to install the PCL driver by connecting the USB cable plug and playit is necessary to change the settings of the machine. Deletes the last number entered To delete all of the entered number, press Clear. After changing the machine settings, proceed to step 4 to install the driver using the same procedure as for the UFR II Printer Driver.
If you do not need to configure this setting manually, follow the procedure below. Use – numeric keys to enter the subnet mask then press [OK].
Select the mode that most suits your needs from the chart below. If you use tone dialing, skip the following procedure. If you want to install the PCL driver by connecting the USB cable plug and playit is necessary to change the settings of the machine. Auto Color, Full Color, Black. If you want to add a port, click [Add Port] and then select the printer port you want to add. If you are using a shared printer in the Print Server Point and Print environment, it is necessary to install the Canon Driver Information Assist Service in the server PC to set up the printer configuration automatically or use the Job Accounting feature.
A user selects [Print] from any Windows application software, selects the Canon fax driver as the printer, and specifies its destination s and options. If the display returns to the Standby mode Auto Clear function while you are performing setup. The following functions are available with USB Connection: For more information about the receive modes, see ” Methods for Receiving Faxes.
If the c10022 is communicating with the network properly, the IP address, subnet mask, and gateway address are displayed. Connect the machine and your computer with a USB cable A. Open the [Printers and Faxes] folder for Windows Click on the circled button on each screen to proceed to the next step.
Color imageRUNNER Ci
You can enter the following characters in each input mode: Press – numeric keys to enter numbers. The NetSpot Device Installer enables you to set up the machine for network operations.
An IP address must be specified in order to enable communication between the machine and computer.
In some countries, time is advanced throughout the summer season. Return to overview Drivers Details about each drivers installation can be found in the corresponding HTML manuals listed in the Manuals subsection below.
An IP Internet Protocol address is an identification number assigned to each individual computer connected tothe Internet. The default setting is 15 minutes. Press [Back] to return to the previous screen. For more information on how to use each function with USB Connection, refer to the following:.